Conditions of use of cnc lathe machine

The normal use of the high precision cnc lathe must meet the following conditions: the voltage fluctuation of the power supply at the location of the flat bed cnc lathe machine is small, the ambient temperature is lower than 30 degrees Celsius, and the relative temperature is less than 80%.

1. Location and environmental requirements of cnc lathe manufacture

The location of the cnc lathe machine should be far away from the vibration source, and should avoid the influence of direct sunlight and thermal radiation, and avoid the influence of humidity and airflow. If there is a vibration source near the cnc lathe, anti-vibration trenches should be set around the mini cnc lathe. Otherwise, the machining accuracy and stability of the mini cnc lathe machine will be directly affected, and the electronic components will be in poor contact and malfunction, which will affect the reliability of the cnc mini metal lathe.

2. Power requirements for lathe machine mini cnc

Generally, the cnc mini metal lathe machine is installed in the machining workshop, not only the ambient temperature changes greatly, the use conditions are poor, but also there are many kinds of electromechanical equipment, which causes the power grid to fluctuate greatly. Therefore, the location where the CNC lathe turning is installed requires strict control of the power supply voltage. Power supply voltage fluctuations must be within the allowable range and remain relatively stable. Otherwise, the normal operation of the CNC system will be affected.

3. Automatic cnc lathe temperature condition

The ambient temperature of CNC horizontal lathe is lower than 30 degrees Celsius, and the relative temperature is less than 80%. Generally speaking, there is an exhaust fan or a cooling fan inside the CNC electric control box to keep the working temperature of the electronic components, especially the central processing unit, constant or the temperature difference changes very little. Excessive temperature and humidity will reduce the life of control system components and lead to increased failures. The increase of temperature and humidity, and the increase of dust will cause bonding on the integrated circuit board and cause short circuit.

4. Use the flat bed cnc lathe machine according to the instructions

When the user uses cnc lathe manufacture, it is not allowed to change the parameters set by the manufacturer in the control system at will. The setting of these parameters is directly related to the dynamic characteristics of each component of the machine tool. Only the backlash compensation parameter values can be adjusted according to the actual situation.

The user cannot change the accessories of the machine tool at will, such as using the hydraulic chuck beyond the specification. The manufacturer fully considers the matching of various link parameters when setting accessories. Blind replacement results in mismatch of parameters in various links, and even causes unexpected accidents.

The pressure of the hydraulic chuck, hydraulic tool rest, hydraulic tailstock and hydraulic cylinder should be within the allowable stress range, and it is not allowed to increase arbitrarily.