Horizontal CNC Lathe ALCK6150 X1000 sent to Brazil Mar 22, 2023
CNC turning ALCK6140X1000 to Mexico Apr 06, 2023
Horizontal CNC Lathe Machine Metal Jul 07, 2022
Practical reasons for the overheating of CNC horizontal lathe
Automatic cnc lathe is very common in the field of CNC machining. It has high production and processing efficiency and is easy to operate. It can not only save a lot of human resources, but more importantly, it can improve the high efficiency of production and processing.
What is the reason that the temperature of the cnc mini lathe machine is too high?
1. Difficult problems such as abnormal damage of high precision cnc lathe parts and blockage of pipelines will cause temperature rise at the corresponding position.
2. The function of the parts of the flat bed cnc lathe machine is closely related to the temperature. If the temperature is too high, the function of the parts will be reduced, and even the ablation of the parts will continue to occur.
Temperature detection plays a key role in fault detection of industrial equipment.
To put it bluntly, temperature detection refers to the use of various temperature measuring instruments and equipment to measure the temperature rise of cnc lathe manufacture, and compare it with the temperature of the cnc lathe machine when it is running normally, and then diagnose the parts and damage levels that cause common faults.
In the fault detection and detection of cnc lathe industrial equipment, temperature measurement methods can be divided into two types: touch temperature measurement and non-touch temperature measurement.
The touch temperature measurement has the characteristics of rapid, appropriate and convenient, and is widely used in various industrial production areas.
The purpose of the mini cnc lathe machine slide bearing setting is to limit the work of the main shaft bearing of the generator set so that it can only bear the axial load on the main shaft bearing of the generator set within a specific range of the bearing clearance of the slide rail.
Mini cnc lathe bearing temperature rise
1. The point contact on the surface of the shaft floor tile is small, the surface is not enough, and it does not meet the specifications and models of the machine and equipment.
2. The increase of the bearing clearance far exceeds the clearance specified in the design scheme, which makes it difficult to generate oil wedges when the grease enters the bearing roof tile, resulting in poor lubrication, resulting in the temperature rise of the guide bearing and the expansion of the vibration of the generator set.
The solution for heating up the guide bearing of cnc mini metal lathe
When lubricating the surface of the floor tile, even according to the shaking point of the main shaft bearing, although the pairing gap is the least, because of the short distance, the lubricating standard is good, the calorific value caused by friction is small, the cooling effect is very good, and it is generally not easy to cause the bearing to heat up. It will not cause the floor tiles to ignite.
Related Posts
Slant bed lathe ALTCK6350 Slant bed lathe CNC lathe for metal
Slant bed lathe ALTCK6350 Slant bed lathe CNC lathe for metal… Read More
Automatic cnc lathe ALCK0640 sent to Belarus
Automatic cnc lathe ALCK0640 sent to Belarus… Read More